Reverb loop?Perharps a processor loop?

Log Out | Topics | Search Moderators | Edit Profile

Author Message   T.ROGERS Posted on Thursday, September 01, 2005 - 06:42 pm:    CAN ANYONE TELL ME IF YOU CAN USE THE REVERB IN AND OUT LOOP FOR A SIGNAL PROCESSOR...WOULD BE NICE FOR A DIGETALLY REVERB AND OTHER EFFECTS   T.ROGERS Posted on Sunday, September 11, 2005 - 11:09 pm:    OK PEOPLE; LETS HAVE SOME IDEAS ON THIS REVERB LOOP....ANY TECH HELP WOULD BE GREAT...TERRY}   Phglemboyant Posted on Tuesday, September 13, 2005 - 11:50 am:    no.   T. ROGERS Posted on Tuesday, September 13, 2005 - 06:49 pm:    JUST NO....?????...NOW I AM CONFUSED   Anonymous Posted on Thursday, September 15, 2005 - 11:12 am:    Yes no.   Steve Kennedy (admin) Username: admin Registered: 03-2002 Posted on Friday, December 30, 2005 - 06:54 pm:    The reverb signal that drives the spring assembly should be pretty HOT and the reverb recovery input should be very sensitive. They are not the right levels or impedances to use as an effects loops without redesigning the electronics. Steve   T.ROGERS Posted on Monday, January 02, 2006 - 10:02 am:    Thanks Steve for the info. It was just an idea that had been talked about among some of our band members. Again thanks Terry   mike kaus Posted on Monday, January 02, 2006 - 03:35 pm:    Like Steve said, it's a rough mismatch. If you were to run the reverb send signal through a buffer and then feed the lowered signal back through the return, it could be done but honestly. you could get an effects looper and do the same thing without all the goop. Mike.