What a Shame!

Log Out | Topics | Search Moderators | Edit Profile

Author Message   T.E. Price (uposb4) Username: uposb4 Registered: 05-2006 Posted on Sunday, August 15, 2010 - 05:12 pm:    Terrible way to treat am amp.   Mike Kaus (mm210) Username: mm210 Registered: 05-2006 Posted on Sunday, August 15, 2010 - 05:46 pm:    My gawd! I wouldn't do that to an Ampeg!   Bill Traylor (bozzy369) Username: bozzy369 Registered: 02-2008 Posted on Monday, August 16, 2010 - 12:49 am:    what in the hell happened to that head?   Bill Traylor (bozzy369) Username: bozzy369 Registered: 02-2008 Posted on Monday, August 16, 2010 - 12:57 am:    This is what that head should look like .   Bill Traylor (bozzy369) Username: bozzy369 Registered: 02-2008 Posted on Monday, August 16, 2010 - 01:00 am:    now that i can see barely see the lettering on the faceplate of the messed up one ,it might not be a sixty-five but you get the idea.   Steve Kennedy (admin) Username: admin Registered: 03-2002 Posted on Tuesday, March 11, 2014 - 10:31 pm:    Somebody did this on purpose. They "punked" it up. The front panel had to have been removed, roughed up, then re-installed (damage goes under the pot, switch and jack nuts as well as the pilot light). The grill board was mounted BACKWARDS without moving the badges (if it even still had them to begin with). This is a "Kurt Cobain" job.