| Author | Message | ||
| Larry Marseglia (lrmars) Username: lrmars Registered: 07-2006 |
My HD130 Reverb head does NOT say the speaker outputs on the back of the amp are wired in series. There is apparantly a way, with a continuity tester, to verify this. If the jacks are in fact NOT wired in series, is this something a tech can modify? I have 2 four ohm cabinets I would occasionally like to run with this amp. LRMars | ||
| Mike Kaus (mm210) Username: mm210 Registered: 05-2006 |
You can have it wired that way pretty easy. Just requires a shorting jack and the time. Any QUALIFIED tech can do it. |
Tue, 03/25/2014 - 09:29
#1