| Author | Message | ||
| Jimmy -aus- |
If anyone would like to sell me a back panel for a hd130 reverb head, or just send me a tracing, name your price! Cheers}}} | ||
| michael kaus |
I've got a 130 reverb head in the basement that I could trace or measure for you. Measurements would be easier-I could just email them back to you. Let me know. Mike. |
Tue, 03/25/2014 - 09:26
#1
Back panel
I have an HD-130 Reverb head with no back panel. LOL, a lot of people must have taken them off. I'd appreciate any measurements if you're still active on the board and can provide the info.
I would be glad to but I sold
I would be glad to but I sold it to somebody on this board! Mike.
This is crazy! I was the OP
This is crazy! I was the OP of this thread from 15 years ago!
I just had a look in here because I've bought another 210HD130. (I had sold my first one a few years back and had come to regret it).
The HD130 Reverb head and matching 4x12 that I needed the back panel for were sold off years ago, as the whole thing was way too heavy, with only one handle on the top of the quad!
Anyway I ended up buying an empty HD head cab and used the back panel off that.
Need help with back panel measurements`
I talked with Mojotone and they may be able to build me some back panels for my 65 Reverb and 130 Reverb heads. I took measurements from the head opening and estimated based on a picture I found for the spacing If anyone could pull out a tape measure and help me verify this it would be much appreciated. I'm certain many people have missing back panels so this could be helpful in finding a vendor.